I decided I would do a spotlight card for today’s post and settled on this image from Picket Fence Studios called Wild Rose.
First up I did the Color Burst background using cold press watercolour paper to use for my framing and bird. I used Ultramarine Blue, Pthalo Blue and Chartreuse, then dried the piece.
To make my frame I used my Elegant Stitching Die for the detail and a Spellbinder die to cut the inside part away.
Using Gina K. Designs Wisper White card stock I stamped the image with VersaFine Claire Ink in Nocturne then coloured the highlighted flowers with Copics. I attached the frames using fun foam.
I stamped the little bird on some of the left over Color Burst piece and die cut attaching to the frame on the bottom using glue and a piece of fun foam under his body.
To finish I stamped the sentiment along the bottom of the card using Archival Ink in Paradise Teal and doing several stampings to get the deeper colour.
Thank you for visiting today and I hope you have enjoyed this card today. Following are affiliate links to the products I used on this card, at no extra cost to you.
I hope you enjoyed our Turnabout Blog Hop over the weekend- and if you haven’t checked it out yet, there is still time to hop along and leave some comments for a chance to win a $50 gift certificate to the online store!
Today I’m sharing another simple card that uses the ‘Hello Sunshine’ Turnabout again, along with the same four colors of Distress Oxide Ink that I used on my card for the hop: Fossilized Amber, Spiced Marmalade, Squeezed Lemonade & Wild Honey, along with a spritz of Distress Oxide Spray in Spiced Marmalade, but this time I stamped it on a kraft card base. The effect of the yellow & orange inks on kraft is a lot more subtle, but I had something different in mind for this one… I pictured the burst design as the flash from this adorable little camera image by Picket Fence Studios!
I fell in love with this “Capture Life in Color” stamp when I saw it, though I didn’t really know what I would do with it… except to make it colorful! I love pairing bright colors with kraft so I decided to give it a go. I stamped the image twice, once on white cardstock and once directly on the kraft base. I knew I would be fussy cutting the image, but thought the words would look best as part of the base rather than having a white outline around them.
After that, I did some very simple coloring with watercolor pencils (these ones by Nuvo have a nice mix of bright colors!), fussy cut my image and adhered it with 3D Foam Squares before adding some touches of glitter with Nuvo Glitter Drops in Honey Gold & Aquatic Mist. (always apply the wet stuff last! LOL). Once it sat for a bit, I decided to add some tiny pieces of washi tape and some heart bling to balance everything and add that extra touch of texture…
This card is super simple, but I think the colors and the message really POP! Hope it makes you smile, it’s a fun use for this Turnabout stamp design.
Happy Hump Day! It’s Chala here and today was such a fun day! I got to spend it on a field trip with my daughter at Bar-U Ranch. This ranch has been around since the 1800s and is one of Alberta’s National Historic Sites. I felt right at home and it made me want to get out in my yard to work, especially since we are finally seeing some of our perennials pop up!
My favourite perennials in my garden are by far my peonies! I love watching the buds come up and all the ants work away to help them open up. Since mine aren’t that far along yet I thought I would pull out this gorgeous stamp set from Picket Fence call Peony Bouquet. Immediately I knew I wanted to layer these flowers and create a gatefold card.
To create this card I will also be using masks and for this I use the Avery full sheet labels, stamp the images I am going to be using and then fussy cut them out. This takes a bit of time but is SO worth it and you can save the masks to use again!
My card bases (there will be two) will be Canson XL cold pressed watercolour paper 140lb. They are standard A2 size. I use my masks to lay out where I want to stamp on each card. The first one I will stamp normally. I am using my Tim Holtz travel stamp platform so that I can multi stamp for a better impression if I need to. I stamp my images with the AMAZING Versafine Clair Nocturne Ink. I say this ink is amazing because it really is. It is my first time using it and the results are spectacular! Great impression with detailed stamps and it is perfect for this project as it is watercolour and water based marker safe. It is my new favourite ink!
The second card I am going to turn it backwards so that it opens from left to right and stamp. I line up the cards so that I can get an idea where to place the flower so that when I cut out the images they will nestle together nicely. This is really hard to explain and I encourage to head over and watch the video for clarification.
I like to tape my card base down with some Therm-o Web removable purple tape to minimize warping from the watercolouring. My watercolour process is to begin with the lightest colour to give me an idea of where I want the darker shading. I start with wet on dry and layer the colours as I go along. I also like to dry my project in between. Again, you can watch all of this go down by clicking the video linked at the end of this blog.
Once I have everything coloured and dry I give a wash of light blue to the panel. At this point I was not sure what I would be cutting out and wanted a cohesive look. Again, I dried the project completely before staring my fussy cutting.
Once I have the images trimmed out I place the two cards together to ensure everything works. I did have to trim a VERY small amount of on edge of my card in order for the cards to close and lay nice.
Now it is time to adhere the cards together. I am want to use a strong adhesive to make sure the to cards don’t come apart. My go to strong adhesive for this job is the Be creative scoring-tape. I only remove a portion of the backing so that when I am lining up the cards they don’t stick together when and where I don’t want them to. Once everything is line up nicely and I can then remove the backing completely. To see this trick in action….check out the video! 😉
My card was popping up…so, I thought I would run it through my Gemini Jr. to flatten it a bit. It worked…however, it did leave an impression of the flowers on the inside of my card….this didn’t bother me as I added a light blue piece of cardstock to the inside as a guide to where to write the sentiment and it covered most of it up.
I like to go back to my images with a black pen/marker (I am using a Copic multiliner) to darken the images and edges so that it looks neater.
I want the flowers to be the main focal of this card so my sentiment is very simple. I am stamping the Thank you sentiment from the Concord &9th Blooms Fill in set with Versamark Ink and heat emboss with white embossing powder. I will then adhere it with some liquid adhesive on the right flap portion of the card. I think it works perfectly for this card and it was nice and handy from my last blog post! LOL!
The last thing I did was added some highlights with my white gel pen and some Sparkletz water droplets.
Here is a look at the finished card. I am very happy with how this turned out! I think maybe next time I might want to add some twine to wrap around it and tie a bow in front? 🤔 Or maybe not? Let me know your thoughts and what you would change or do differently.
Thank you so much for stopping by. As promised here is the video link!
