Kia here with you today and in keeping with our hop theme for November I would like to share this Poppy die card with you.
This die is very old, I think around 10 years. It is one of the first Memory Box dies that I bought, and in the past I used it all the time and will continue to use it in the future.
While this die is hard to find these days, Scrap’n Stamp has many newer Poppy dies and stamps in the store and they are 20% off, but just until the end of the day.
The background is stencilled using Fossilized Amber Distress Oxide inks. I styled the poppies and attached them to the panel using foam squares and glue.
As this sentiment is perfect for this card, I decided to go ahead and use it stamping with VersaFine Clair ink in Nocturne. It is a Visible Image sentiment and you can find information about it on my blog.
I hope this card gives you some inspiration for your cards and using Poppies in your design.
Thank you for joining us today. Affiliate links to the products used today and the Scrap’n Stamp Poppy dies can be found below, at no extra cost to you.
Hello and Happy Wednesday my crafty friends. Nancy F on the blog today with a fun Thanksgiving-inspired card. Always a good time creating for Scrap’n Stamp Canada
Being that our October challenge on the Scrap’n Stamp facebook page was to create using distress oxides, I decided to stretch it out a bit and use the regular inks along with one of the oxides. I thought this was the best way to colour in these adorable little images from My Favorite Things. I stamped them out using Versa Clair nocturn ink and heat set using some clear embossing powder and then went to town painting them in with the inks. I ended up mixing and layering colors to get the right shades and look.
The distress inks I chose to use were wild honey, rusty hinge, carved pumpkin, brushed corduroy, ground espresso, both in oxide and regular ink, as well as tea dye, pine needles, and aged mahogany.
Once I was finished painting all the images in, I fussy cut everything out as I did not have the coordinating dies. Good news for you, however, Scrap’n Stamp does carry the die set and I highly suggest purchasing the coordinating die if you get the set. Makes things a lot easier.
I decided it would be fun to create a little bit of a different card than my usual, as I felt a little bit stuck in a rut so I decided to create a gatefold card to really bring this scene to a whole other level.
To create the gatefold card I cut down a piece of 12 x 12 orange cardstock to 4 1/4 x 11 and scored each end at 2 3/4. I then need to figure out my layers and scene for the card. This took me a bit of time but I am really happy with the finished product.
I really wanted to play up the colours I used for the little girls and pumpkin and managed to find pattern paper that really worked well. I used the Lawn Fawn Fall Fling pattern paper as well as some green shimmer cardstock and metallic coooper cardstock.
I cut down three layers for both the front panels and the inside just to add a little extra dimension, stability, and interest. The front panel measurements are as followed, Cooper panels (2) @ 2 1/2 x 4 Green shimmer (2) @ 2 3/8 x 3 7/8, layer 3-pattern paper (2) @ 2 1/4 x 3 3/4.
The inside panel measurements are as follows Copper 4 x 5 1/2, Green Shimmer 3 7/8 x 5 1/8 the Green leafy pattern paper is 3 3/4 x 4 15/16. I also added in a white panel which was die cut from the MFT wonky stitched rectangle dies. While I was die cutting I thought it would be fun to add a little more interest and create not only a scene on the outside of the card but also finish off the inside with a similar look. To accomplish this I die cut the picket fence from Kraft cardstock which I edged with some ground espresso distress ink.
I repeated this on the outside of the card which was the anchor for the rest of my little scene. I cut green cardstock down to measure 1 1/2 x 5 1/8 and layered on a piece of copper 1 1/4 x 4 15/16 and then added a strip of that same pattern paper from the inside which measures 1 1/8 x 4 7/8 on top of the metallic paper. I die cut a white banner strip and stamped the sentiment once again using ground expresso. Before I attached everything to the front of the card I decided to add in that Behind Second die cut fence. this really pulled the scene together. I added each of the cute little girls to the flaps of the card. One in front of the fence, she was popped up with a bit of foam tape and the other girl behind the fence flat to the card. I added some leaves and pumpkins to both the flaps of the card as well as the inside with the little squirel.
I was really quite happy with the way this card turned out. I hope you enjoyed it and come over to the Scrap’n Stamp Challenge page to share with us some of your projects using distress oxides.
Hello and welcome back! One of my favourite things to do is to combine different stamp companies on one project. This actually took me quite awhile to get comfortable with. I always thought it was “taboo” to have a bunch of different brands on one card, haha!
But, in fact, by combining your sets, you open up a whole new world of possibilities! More often than not, they compliment each other very well. I chose to combine Gina K Designs and Lawn on my card today.
I coloured up some flowers and all the leaves from the Elegant Aster Stamp Set from Gina K. I’ve been loving coloured pencils lately so that was my medium of choice. I used the co-ordinating dies to cut each image out.
Now, I think the florals would have looked great directly on the card front but by using the Polka Heart Backdrop Die from Lawn Fawn it took the card to another level! By using a tone on tone look, the background die gave texture and a bit of dimension. I did trim the heart background just a bit.
I popped up the floral arrangement as well as the sentiment. I didn’t add any sort of embellishment which was hard to do! But I actually like the look of the simple, no fuss look!
Thank you for dropping by today! Have a great day and a Happy Thanksgiving!!
